HomePhotocellsElectricalA-ZSecurityLightingComponentsWorkwear&ToolsHFballastShipping/PoliciesAboutAcetekContactAcetek

Paypal-moving.gif



Lantern Light

 

  • Black 
  • White
  • Lantern only
  • LED lamp  

 

Coach-Lamp.jpg

Description

These light weight metal lanterns are manufactured from aluminum die-cast minimising corrosion without resorting to the undesirable feel of plastics.
The 4 clear panels are manufactured from 3mm glass which will not discolour over time unlike plastic the equivalents. The lantern can be purchased with or without a 2.5 watt LED lamp. (Golf-Ball Style) which produces reasonable illumination with great energy saving.

 

  • Light base type E27 
  • Max power 60 watts
  • Rated to IP44 (outdoor use)
  • Voltage 220-240v AC 50Hz
  • Aluminum/Glass construction
  • Size 201 x 151 x 344mm

 

 


Lantern


Colour

Very low stock


LED Lamp 240v ac

LED-lamp-Acetek.jpg

 

Description
Suitable for a wide range of applications with super bright narrow beam-angle white LEDs. It operates between 220-240vac and emits approximately 120 lumen's from 28 x 0.06w 5mm LEDs. (total 1.6 watts) The LED's are mounted on a white reflective printed circuit board which is protected by a toughened glass shield.. The lamp measures approx 140mm width x 130mm height 110mm depth and comes a an adjustable mounting strap. The lamp is rated to IP44 (Splash proof) and can be used with any of our 230v CellOptik photocells and outdoor switches.

 

  • Very low energy usage
  • 28 x 0.06w LEDs
  • Long life (possibly 50,000h
  • Narrow beam (minimises light pollution)

 


LED Lamp 240v ac




Terminal Fused

3a-fused-terminal-block.jpg

Description
These 3 way fused terminal blocks with M3 earth thread come complete with a 3 amp fuse. (fuse 25x 6.3mm)

Terminal Fused




LED Lamp 12vdc

1wattLEDlamp.JPG

Description
Suitable for a wide range of applications these super bright wide angle white LED tubes contain 9 low current LED's with beam angles of 120°degrees. They operate at 12v dc with built in polarity protection and emit a total of 54 lumens at just 60ma making ideal for use in solar intallations. (approx 0.8 watts) The LED's are mounted on a white reflective printed circuit board with the outter tube manufactured from high transmission clear PETG offering maximum protection to the LED's with limited light loss. The tube is 420mm long and comes complete with 250mm leads and 2 metal mounting clips. These lamps will either triple your light output or save a third on power consumption when compared with conventional lamps. We use these LED's in our quality industial  LED's back lit illumination sign kits. The colour versions have 45° beam angles.

Our 12vdc UK power adaptor is available for this product, see our Security page

Need longer cables add "5M-EXT-LV" from the A-Z Electrical


Bulit to order

LED Lamp 12vdc


Colour


LED Lamp

12v 0.9 watts

 

Available 

1 x  lamp

2 x  lamps

2 x lamps + adaptor 

 

bic12v24.JPG

Description
Suitable for a wide range of applications these super bright wide angle white LED Bi-pin lamps contain 24 low current LED's with beam angles of 160°degrees. They operate at 12v ac or dc with built in polarity protection and emit a total of 90 lumens at just 70ma making ideal for use in solar applications. (approx 0.9 watts) The LED's are mounted on a white reflective printed circuit board  The printed circuit board is 25mm in diameter and has a 4.7mm  bi-pin connection (G4)  These lamps will either triple your light output or save a third on power consumption when compared with conventional lamps. 

Our 12vdc UK power adaptor is available for this product, see our Security page

LED Lamp 12V 0.9 watts



Low stock 

 


T8 Push

Lampholders 

T8-Push-Lampholder.jpg

Description
These quality T8 (for 26mm lamps) lamp connection holders have twin push wire cable entries for each connection making them suitable for use with both multi lamp high frequency ballasts and conventional choke types. The push wire connectors require a solid core cable or tinned multi strand between 0.5 to 1mm. The lampholders are supplied in pairs for 1 lamp.





T8 Twist

Lampholders

T8-twist-holder.jpg

Description
These quality T8 twist type (for 26mm lamps) lamp connection holders have twin push wire cable entries for each connection making them suitable for use with multi lamp high frequency ballasts. The push wire connectors require a solid core cable or tinned multi strand between 0.5 to 1mm. The lampholders are supplied in pairs for 1 lamp.

T8 Twist Lampholders




T5 Push

Lampholders

T5-Push-Lampholder.jpg

Description
These quality T5 (for 16mm lamps) lamp connection holders have twin push wire cable entries for each connection making them suitable for use with multi lamp high frequency ballasts. The push wire connectors require a solid core cable or tinned multi strand between 0.5 to 1mm. The lampholders are supplied in pairs for 1 lamp.

T5 Push Lampholders




T5 Twist

Lampholders

T5-Twist-Lampholder.jpg

Description
These quality T5 twist type (for 16mm lamps) lamp connection holders have twin push wire cable entries for each connection making them suitable for use with multi lamp high frequency ballasts. The push wire connectors require a solid core cable or tinned multi strand between 0.5 to 1mm. The lampholders are supplied in pairs for 1 lamp.

T5 Twist Lampholders




Tube

Lamp Clip

Lamp-clip.jpg

Description
These quality nickle plated steel lamp clips are avalible in 2 sizes, 16mm for T5 lamps and 26mm for T8 lamps and are supplied in pairs for 1 lamp. The single mounting hole is 3.2mm.

Tube Lamp Clip




Single Core

Cable

Single-cable.jpg

Description
A quality high temperature single solid core PVC cable design to be used in lighting applications. 0.5mm 

Single core cable


Twin Core

Cable

Fig8cable.jpg

Description
A quality high temperature figure of 8 (shot gun) PVC cable design to be used in lighting applications. 0.5mm 




We will be adding new products